COVERED CONTACT HIDES SCREWS
December 1, 2006
The TANE-GP-23 is a surface-mount contact with a 1-inch gap and has a cover to hide screws as well as protect wiring to give windows or doors a clean look. The contact can be wired from the back, the side or the top if needed. To install, the technician snaps the cover off, attaches the wire from any direction, screws it down and pops the cover back on. Colors are white, gray and brown with extra vent magnets available.
For free information circle 416 or visit www.sdmmag.com/webcard or www.magneticcontacts.com