The ConvertIP series is a family of standards-based IP devices that delivers a simple approach to SMPTE ST 2110 and IPMX-ready networks. These devices enable broadcast and Pro AV professionals to transform standard and existing infrastructures into interoperable, cost-efficient and scalable 1 GbE, 2.5 GbE, or 10/25 GbE networks to support a wide range of compressed and uncompressed 4K AV-over-IP applications and workflows. ConductIP signal routing software is designed to simplify content distribution in AV networks of any size and features a customizable 360-deg. view of all devices and media flows to discover, monitor and route any NMOS-enabled ST 2110 and IPMX-ready audio, video and ancillary signal on the network. ConvertIP transmitters and receivers are built on ST 2110, the NMOS suite of open APIs, and IPMX-ready industry-standards-based technologies, and combined with Pro AV, JPEG XS, and uncompressed codec support. ConvertIP series includes an intuitive, Web-based command center that allows users to access, control and operate all ConvertIP devices from any location. Also included with ConvertIP is the ConvertIP Manager application, which features a dashboard view for multi-unit setup/maintenance and routing operations. Lastly, the ConductIP standards-based signal routing platform enables multi-vendor interoperability by allowing users to discover, monitor and distribute all ConvertIP signals, any other SMPTE ST 2110 signals compatible with the NMOS suite of APIs, and IPMX-ready signals from any third-party manufacturer. 

Matrox Video |